-٩-
OPERATING UNIT THROUGH REMOTE CONTROL (Cont.)
6.2 DESCRIPTION OF REMOTE CONTROL DISPLAY
1. ON / OFF display
This indicator will be displayed when the air conditioner is operating.
2. Transmission Indicator
This transmission indicator will light when remote controller transmits signals to the indoor unit.
3. Mode display
Displays the current selected mode.
including AUTO, COOL, DRY and FAN
4. Mode display (FAN mode)
5. Fan Speed display:
Displays the selected fan speed: HIGH and LOW.
Nothing displays when the fan speed is selected in AUTO speed.
When AUTO or DRY Mode is selected, there will be no signals displayed.
6. Temp. / Timer display
The temperature setting (from 17°C to 30°C) or timer setting (0~24h) will be displayed.
If ECO mode is selected, there will be no display.
7. Timer display
This display area shows the settings of the TIMER. That is, if only the Auto-on time function is set,
it will display TIMER ON. If only the Auto-off time function is set, it will display TIMER OFF. If both
functions are set, it will display TIMER ON OFF which indicates you have chosen both the Auto-on
time and Auto-off time.
8. Lock indicator
LOCK display is displayed when pushing the LOCK button. Push the LOCK button to clear display.
4
1
6
7
8
2
3
5
To Next Page
Loading...
