Installing the i-Vu® Open Router
i-Vu® Open Router CARRIER CORPORATION ©2020
Installation and Start-up Guide All rights reserved
18
13 Click Read again to verify that the new .bdt file was written to the router. See example below.
NOTE If you have a large BDT, you may have to re-size the BBMD Configuration Tool window to see the
Broadcast Distribution Table.
14 Using the next IP address in the .bdt file, repeat steps 7 through 14 until every file has been updated.
NOTE To clear the BBMD entries from a router, follow the steps above using an empty (blank) .bdt file. A
cleared BBMD table contains just the router’s IP address without entries in the BBMD table, as shown below.
To Next Page
Loading...