5
ACCESSORIES
Part Number Used With Notes
KGADC0101BVC All 1
KGAVT0701CVT See Venting Tables 1
KGAVT0801CVT See Venting Tables 1
KGAVT0101BRA See Venting Tables 1, 2
KGAVT0201BRA See Venting Tables 1, 2
Part Number Used With Notes
KGAHT0201CFP All 7
-llAPFC1010THAGK
-llACVP0110DAAGK
KGACK0101HCK All DV Horizontal -
P908-0001 All 6
Part Number Used With Notes
-llALLA1020BSAGK
-llALLA1010ADAGK
-llALLA1020ADAGK
-llALLA1030ADAGK
KGARP0301B14 14.2" Wide Furnaces 7
KGARP0301B17 17.5" Wide Furnaces 7
KGARP0301B21 21" Wide Furnaces 7
KGARP0301B24 24.5" Wide Furnaces 7
KGAAD0101MEC 20"x25" IAQ Devices 7
KGAAD0201MEC 24"x25" IAQ Devices 7
Part Number Used With Notes
-llAPSV1025PNAGK
-llAPSV1044NPAGK
KGAHA0150N42 All 4, 6
KGAHA0250N43 All 4, 6
KGAHA0350N44 All 4
KGAHA0450N45 All 4
KGAHA0550N46 All 4
KGAHA1550N47 All 4
KGAHA1650N48 All 4
KGAHA0650P54 All 4, 6
KGAHA0750P55 All 4
KGAHA0850P56 All 4, 6
KGAHA5750125 All 4, 6
KGAHA5750130 All 4, 6
Part Number Used With Notes
-llASMF1030DSAGK
-llAMPA1030DSAGK
-llAV-10DIUCCXTSYS
-llAV-10ZIUCCXTSYS
Part Number Used With Notes
KGAWF1306UFR All 5
KGAWF1506UFR All 5
EXPXXFIL0016 EZXCAB--1016 3, 5
EXPXXFIL0020 EZXCAB--1020 3, 5
EXPXXFIL0024 EZXCAB--1024 3, 5
EXPXXUNV0016 EZXCAB--1016 3, 5
EXPXXUNV0020 EZXCAB--1020 3, 5
EXPXXUNV0024 EZXCAB--1024 3, 5
FILXXCAR0016 FILCABXL1016 3, 5
FILXXCAR0020 FILCABXL1020 3, 5
FILXXCAR0024 FILCABXL2024 3, 5
GAPAAXCC1625 Upto1600CFM 5
GAPAAXCC2025 Upto2000CFM 5
GAPCCCAR1625 GAPAAXCC1625-A08 5
GAPCCCAR2025 GAPAAXCC2025-A08 5
PGAPXX1625 Upto1600CFM 5,7
PGAPXX2025 Upto2000CFM 5,7
PGAPAXXCAR1625 GAPAAXCC1625 5, 7
PGAPAXXCAR2025 GAPAAXCC2025 5, 7
Notes:
2. Not for use with Concentric Vent Termination Kits.
3. Last 2 digits of Part Number indicate filter size.
4. Last 2 digits of Part Number indicate orifice size.
5. Choose IAQ/filter assembly appropriate for the designed system airflow and static pressure. Use optional IAQ Device Duct Adapters as required.
6. Available from Replacement Components group.
7. Kit coming soon. Expected availability 2Q2012.
1. CSA requires that a termination kit be used. See latest PD for pipe and kit size selection. The qualified installer or agency must use only
factory-authorized kits when modifying these furnaces.
Carrier Performance Air Purifier
16 x 25
20 x 25
Carrier Performance Air Purifier Replacement Filter
16 x 25
20 x 25
Carrier Infinity Air Purifier
16 x 25
20 x 25
Carrier Infinity Air Purifier Replacement Filter
16 x 25
20 x 25
Cartridge Media Filter
16-in.
20-in.
24.in.
EZ-Flex Filter with End Caps
16-in.
20-in.
24-in.
Filter Pack (6 pack) - Washable
16 x 25 x 1
24 x 25 x 1
EZ-Flex Filter
16-in.
20-in.
24-in.
IAQ Accessories
ECM Motor Simulator Kit
Advanced Product Monitor - APM
Infinity Control User Interface
Infinity Control Zoning User Interface
#54 LP
#55 LP
#56 LP
1.25 mm LP
1.30 mm LP
Control Accessories
Gas Orifice Kit
#42 Natural Gas
#43 Natural Gas
#44 Natural Gas
#45 Natural Gas
#46 Natural Gas
#47 Natural Gas
#48 Natural Gas
Gas Conversion Accessories
Gas Conversion Kit - Nat to LP; Var-spd Products
Gas Conversion Kit - LP to Nat; Var-spd Products
Return Air Base (Upflow applications) - Painted
14.2-in. wide
17.5-in. wide
21-in. wide
24.5-in. wide
IAQ Device Duct Adapters (side return) - Painted
20-in IAQ to 16-in side return
24-in IAQ to 16-in side return
Furnace Base Kit for Combustible Floors
Coil Adapters Kits - Painted
No Offset
Single Offsett
Double Offset
Condensate Drainage Accessories
Freeze Protect Kit - Heat Patch for Drain Trap
Freeze Protect Kit - Heat Tape
CPVC to PVC Drain Adapter - 1/2-in. CPVC to 3/4-in. PVC
Horizontal Trap Grommet for Direct Vent Applications
Condensate Neutralizer Kit
Venting Accessories
Vent Kit - Through the Cabinet
Vent Terminal - Concentric
2-in.
3-in.
Vent Terminal Bracket
2-in.
3-in.
Ductwork Adapter Accessories
59TN6A
To Next Page
Loading...
