Need help?Do you have a question about the Carrier Puron 38GLS-07G-703EC-40 and is the answer not in the manual?
General| Brand | Carrier |
|---|---|
| Model | Puron 38GLS-07G-703EC-40 |
| Category | Air Conditioner |
| Language | English |
Details pipe connections, height differences, pipe lengths, and material specifications.
Details the amount of refrigerant required for different unit sizes and configurations.
Outlines the step-by-step process for installing the outdoor unit.
Guides on choosing an optimal location, avoiding specific environmental conditions.
Step-by-step guide on correctly flaring copper tubing ends for secure connections.
Details on connecting the refrigerant lines to the unit's service ports.
Procedure for purging air from the refrigerant lines using a vacuum pump.
Specifies the operating temperature and voltage limits for cooling and heating modes.
Presents electrical data including starting current, power input, and wire size.
Instructions on how to collect all system refrigerant into the outdoor unit.
Methods for checking and adjusting refrigerant charge, including superheating.
Diagrams and procedures for controlling and checking the refrigerant charge.
Guidelines for cleaning coils and performing other maintenance tasks by qualified personnel.
Lists common problems and solutions for the outdoor unit's compressor and fan.
Provides basic operating and maintenance information for the end-user.
Table listing available accessories for the units and their part numbers.
Details the IMQ certification awarded to specific system configurations.
Details specific features like Head Pressure Controller (HPC) and Loss of Refrigerant Pressure Switch (LRPS).
Specifies ambient temperature and power supply limits for cooling operation.
Diagram illustrating the wiring for the head pressure controller system.
Explains the configuration, manual reset, and operational modes of the HPC system.
Details the high and low speed pressure set points for fan operation.
Details specific features like Head Pressure Controller (HPC) and Loss of Refrigerant Pressure Switch (LRPS) for heat pumps.
Specifies the minimum ambient temperature for heat pump operation.
Wiring diagram for the temperature sensor to the printed circuit board.
Explains configuration, manual reset, and operations modes of the HPC for heat pumps.
Details proportional band, output voltage, and hard start time settings.
To Next Page