1-- 2
62--11632
1.2 ENGINE SPECIFICATI ONS
Table 1-2. Specification Chart
MODEL NUMBER 26--00128--00 26--00128--01 26--00128--02 26--00128--04 26--00128--05
TYPE Vertical, Water-- cooled, 4 cycle diesel engine
NUMBER OF CYLINDERS 4
BOREXSTROKE mmXmm(in.Xin.) 83 X 102.4 (3.27 X 4.03)
TOTAL DISPLACEMENT cm
3
(cu.in.) 2216 (135.2)
BRAKE HORSEPOWER
SAE Intermittent HP kW (HP) / RPM
23.65 (31.7) /
1700
23.87 (32.0) /
1800
26.85 (36.0) /
2200
23.87 (32.0) /
1800
23.65 (31.7) /
1700
MAXIMUM SPEED RPM Below 2470
IDLING SPEED RPM 900
COMBUSTION CHAMBER Direct Injection
INJECTION PUMP Bosch “K” Type Mini Pump
GOVERNOR Mechanical Governor + Electronic Governor
INJECTION NOZZLE Bosch “P” Type Hole Nozzle
INJECTION TIMING (UNPRESSURIZED) 2.5° Before T.D.C.
4.0° Before
T.D.C.
2.5° Before T.D.C.
FIRING ORDER 1--3-- 4--2
INJECTION PRESSURE
(V alve Opening Pressure)
19.35 MPa (197.5 kgf/cm
2
, 2809 psi.)
COMPRESSION RATIO 21.5 : 1
LUBRICATION SYSTEM Forced Lubrication by Pump
OIL PRESSURE INDICATION Electrical Type Switch
LUBRICATION FILTER Full Flow Synthetic Media Filter (Cartridge Type)
COOLING SYSTEM Pressurized Radiator, Forced Circulation With Water Pump
STARTING SYSTEM
Electric Starting With Starting Motor
12V, 2.5 kW
STARTING SUPPORT DEVICE Inta ke Air Heater in Intake Manifo ld
FUEL Diesel Fuel No.2--D (ASTM D975)
LUBRICATING OIL *Quality Better Than CF Class (API), SAE 10W--30 or 15W--40
LUBRICATING OIL CAPACITY 14.2 L (15.0 U.S. Quarts)
Weight (DRY) kg (lbs.) 199 (439)
*See paragraph 1.8.6
Downloaded from ManualsNet.com search engine
To Next Page
Loading...