Fig. 4 — Base Unit Dimensions — 48A2,A3020-035
a48-8687
NOTES:
1. Weights include economizer.
2. center of gravity.
3. Unit clearances:
Top of units: no overhang
Condenser coil: 4’ - 0” [1219]
Economizer side: 6’ - 0” [1829]
Heat side: 4’ - 0” [1219]
Filter access side: 10’ - 0” [3048] (for
removal of evaporator coil)
4. Bottom ducts are designed to be attached to ac-
cessory roof curb. If unit is mounted on dunnage,
it is recommended that the ducts be supported
by cross braces as done on accessory roof curb.
5. Dimensions in [ ] are in millimeters. All other di-
mensions are in inches.
To Next Page
Loading...
