Need help?Do you have a question about the Carrier ZS Standard and is the answer not in the manual?
General| Brand | Carrier |
|---|---|
| Model | ZS Standard |
| Category | Accessories |
| Language | English |
Modify the zone temperature by moving the sensor's slider up for warmer or down for cooler.
Temporarily override the schedule for occupied or unoccupied states using the sensor's button.
Explore various screens like Home, Setpoint, Information, and Diagnostic on the ZS Pro sensor.
Interpret icons for temperature, humidity, CO2, VOC, status, and alarm conditions on the display.
Change the zone temperature setpoint on the ZS Pro sensor using the up or down buttons.
Override the programmed schedule for a specified duration using the sensor's override button.
Force the zone into an unoccupied state by pressing and holding the override button for 3 seconds.
Prevent unauthorized changes by locking the ZS Pro sensor buttons with a simultaneous button press.
Modify editable displayed values on the ZS Pro sensor using the up and down buttons.
Manually control fan, heating, or cooling modes by cycling through options on the sensor.
Set the desired fan speed (Auto, Low, Medium, High) by tapping the fan speed button.
Switch the temperature display between Fahrenheit and Celsius using the F/C button.
To Next Page
