MM-350
SON
®
Micro
Plus
60-120x LED Lighted Pocket Microscope with Adapter Clip
Congratulations on selecting your new Micro Brite Plus Microscope with Smartphone Adapter Clip!
In order to achieve optimum performance, please follow instructions for proper use and care.
PRODUCT SPECIFICATION
Magnification:
60x - 120x
Weight:
0.13 lbs (excluding battery)
Battery:
1 AA (not included)
Exit Pupil Diameter:
10mm - 14mm Dimensions: 2.3" X 1.2" X 3.7"
Accessories:
MM-310 Clip
Optical Zoom:
2x
Illumination:
LED
INSTALLING BATTERY
1. Slide open battery door.
2. Insert 1 AA battery with the correct
polarity and replace battery door .
WARNING: Use only alkaline battery.
Keep away from fire or excessive heat.
Inspect battery for corrosion or leakage.
Insert in direction indicated. Rechargeable
battery not recommended.
USING MICROSCOPE
1. Place viewing object directly
below Objective Lens.
2. Press LED Button to turn
ON/OFF.
3. Set Zooming Dial to lowest magnification and
rotate Focusing Ring slowly until image is clear.
Adjust zoom and refocus as needed.
Note: To work properly, microscope must be placed flush to viewing object.
USING ADAPTER CLIP
1. Align the primary camera of the phone to
the center of the circular hole of the adapter
clip. Typically, the primary is a 1 x wide-angle
camera and the other camera(s) are
secondary.
For the latest instructions, and for selecting
primary camera for iPhone 13 Pro and later,
visit www.carson.com/multicam
2. Attach the adapter clip to the top of the microscope
and turn on camera. If viewing image is not centered
or is not a complete round image, adjust adapter clip
making sure it is centered over camera.
Note: Always hold the phone securely during
use. If you release the phone while it is attached
to the microscope it can fall and damage the
phone.
3. Pinch screen to enlarge
image. Take photos and
videos to share with
friends and family.
=
To Next Page
Need help?
General
