Need help?Do you have a question about the Carver 56 Voyager and is the answer not in the manual?
Details the Owner's Guide and OEM information contents.
Explains the guide's purpose for safe operation and maintenance.
Information supplied by component manufacturers for operation and maintenance.
Must be completed and signed by dealer before delivery for warranty.
First step in activating the Carver limited warranty.
Emphasizes operator responsibility and understanding procedures.
Covers keeping the boat in condition, fueling, safety equipment, weather, charts, float plans.
Advises checking forecasts and preparing for changing weather conditions.
Covers fire prevention, response plans, and actions during a fire.
Details types I, II, III, and IV PFDs and their serviceability.
Emphasizes compliance with marine traffic rules for accident prevention.
Advises on ventilation, engine operation, and awareness of exhaust outlets.
Warns that failure to obey labels can result in injury or damage.
Describes the 12V DC system, its wiring, and maintenance.
Covers engine, thruster, house, and generator batteries.
Manages power for safety and other equipment, with breakers that should remain ON.
Covers safety precautions, electrolyte handling, and general maintenance tips.
Lists common problems, their causes, and solutions for the 12V system.
Diagram illustrating the DC electrical system wiring.
Describes the 50 amp AC system, power sources, and circuit divisions.
Details circuits for North America/Asia and Europe/Australia.
Explains using shore power or onboard generator.
Explains power control via circuit breakers and individual controls.
Details GFCI function, how it protects against shock, and its importance.
Explains how devices draw current and the system's total load capacity.
Details how the system interconnects underwater components to prevent corrosion.
Lists common AC system issues, their causes, and solutions.
Wiring diagram for the 220V 60Hz AC electrical system.
Overview of the boat's internal systems.
Explains operation, components, and heating capabilities of the AC system.
Covers capacity, tanks, and water heater.
Explains using seawater for washing and cleaning the boat.
Covers bilge location, pumps, and proper storage in bilges.
Covers toilets, waste tanks, and discharge systems.
Covers antipollution regulations and storage of grey water.
Provides an overview of the propulsion system and engines.
Covers fuel tanks, lines, equalization valves, and shut-off valves.
Explains the system for removing fuel vapor and heat using ducts and blowers.
Explains how engines and exhaust systems are cooled using seawater or coolant.
Covers components and importance of proper venting to prevent CO escape.
Details the automatic system in the engine room and its safety features.
Explains gauges on the instrument panel for monitoring engine operation.
Covers engaging engines, controlling speed, and direction.
Covers fueling and operating engines safely.
Overview of operating and maneuvering the boat.
Recommends professional launching services.
Emphasizes understanding navigation and reading relevant guides.
Covers essential procedures for competent boat operation.
Covers anchor weight, line length, dropping, checking, and weighing anchor.
Emphasizes training and experience for safe operation.
Overview of maintenance activities and schedules.
Provides guidelines for maintenance activities and intervals.
Explains how to maintain various exterior materials to keep the boat looking new.
Covers keeping the cabin ventilated and preventing moisture.
Covers propulsion, electrical, water, bilge, and sanitation systems.
Overview of protecting the boat during periods of non-use.
Advises on professional lifting and proper strap placement.
Explains proper hull support for dry storage to prevent damage.
Covers removing water from systems to prevent freeze damage.
Recommends dry storage for maximum protection.
Lists tasks to complete before launching the boat after storage.
Overview of warranty information and owner responsibilities.
Covers Carver's warranty and responsibilities of owner and dealer.
Outlines requirements for warranty work, emphasizing dealer contact.
Encourages previous owners to register for contact purposes.
Advises contacting dealer or manufacturer for system/component information.
Provides dimensions, capacities, and sleeping accommodations.
Illustrates locations of various components, deck plates, and fittings.
Categorizes components by number and part description for manufacturing.
Details the terms and conditions of the Carver Limited Warranty.
To Next Page
General