Need help?Do you have a question about the CARVIN OVAL DIAMOND Series and is the answer not in the manual?
General| Brand | CARVIN |
|---|---|
| Model | OVAL DIAMOND Series |
| Category | Swimming Pool |
| Language | English |
Review all instructions prior to installation, startup, operation, shutdown, maintenance or winterization for safety.
Alerts to potential hazards that could hurt you or others, identified by black boxes and danger words.
Guidance on obtaining support and contacting the manufacturer for assistance.
Essential safety advice for pool users, covering diving, running, supervision, and equipment.
Instructions for installing warning stickers on the pool for safety compliance and warranty.
Lists essential tools and materials needed for the proper installation of the swimming pool.
Guidelines for choosing an ideal and safe location for the swimming pool.
Critical factors to consider before starting pool installation to ensure safety and longevity.
Detailed steps for leveling the ground surface to ensure a stable and long-lasting pool foundation.
Instructions for digging trenches for the straight section metal structure and patio blocks.
Step-by-step guide for assembling the footbeam and buttress posts, including hardware.
Instructions for assembling pressure plates to the footbeams using screws.
Step 1 for assembling the straight section feet and rails.
Steps for assembling round section rails, ensuring proper transition and alignment.
Detailed steps for installing the pool wall, including preparation, placement, and unrolling.
Instructions for assembling the basin, including adjustments for wall length and securing joints.
Steps for installing the sand bed, plastic liner, and cove for pool base protection.
Steps for installing uprights into bottom plates, ensuring stability against ground movement.
Comprehensive steps for liner installation, including preparation, placement, and wrinkle removal.
Steps to securely fasten the liner's flange to the pool wall and install top rails.
Instructions for installing top plates onto round sections and securing them to uprights.
Steps for inserting and securing post covers to protect the structure and improve aesthetics.
Steps for positioning, centering, and screwing top ledges to solidify the uprights.
Steps for pre-assembling and installing top ledge covers and caps.
Initial steps for filling the pool, including removing air, closing skimmer, and checking structure.
Final steps for filling the pool, cutting liner holes, installing filtration system, and powering up.
Steps for inspecting the pool before closing, checking for leaks and structural integrity.
Steps for safely opening the pool in spring, including cover removal and system startup.
Information on product warranty, coverage periods, and what is included and excluded.
Details on replacement parts availability, their warranty, and how to obtain service.
Contact information for technical support if problems persist after consulting the manual and dealer.
To Next Page
