Need help?Do you have a question about the CARVIN OVAL PLATINUM Series and is the answer not in the manual?
General| Brand | CARVIN |
|---|---|
| Model | OVAL PLATINUM Series |
| Category | Swimming Pool |
| Language | English |
Review all instructions for installation, startup, operation, and maintenance.
Keep the manual as a permanent part of the product for future reference.
Highlights potential hazards with DANGER, WARNING, or CAUTION alerts.
Information on obtaining support via website and manual section.
Essential safety advice for pool users, covering diving, running, supervision, and equipment.
Placement instructions for warning stickers on the pool entrance, liner, and seats.
List of necessary tools and materials for pool installation.
Guidance on selecting a safe and suitable location for the pool.
Key considerations before commencing pool installation.
Step-by-step guide for preparing and leveling the ground for the pool.
Table with dimensions for marking out the pool area based on size.
Instructions for digging trenches for the straight section metal structure.
Instructions for digging to accommodate patio blocks flush with trench depth.
Detailed steps for assembling the footbeam and buttrest post components.
Placing the assembled buttrest posts into the prepared trenches.
Instructions for attaching pressure plates to the assembled footbeams.
Table and diagram for ensuring the pool's straight sections are square.
Guidance on filling trenches with dust stone and compacting the soil.
Step to insert straight section feet and rails.
Pre-installation checks for wall assembly, including weather and personnel.
Steps for assembling round section rails with bottom plates and long rails.
Instructions for adjusting bottom plates if the pool wall seems too long or short.
Joining the wall ends by aligning holes and inserting screws and nuts.
Covering the wall joint with duct tape to protect the liner.
Installing a plastic sheet inside the wall to protect it from contaminants.
Raking and spreading a sand/stone layer inside the pool to protect the liner.
Soaking the sand layer with water and compacting it.
Creating a sand cove along the bottom of the wall for liner protection.
Instructions for unpacking and laying the geotextile liner inside the pool.
Detailed steps for installing uprights into the bottom plates.
Hanging the liner's welded flange onto the top of the pool wall.
Steps to install top plates onto the round sections of the pool structure.
Securing top plates to buttress posts on straight sections of the pool.
Instructions for fitting and securing the post covers.
Steps for positioning and screwing the top ledges onto the structure.
Step-by-step instructions for installing top ledge covers, from pre-assembly to final cap.
Methods to protect the foundation from drainage and prevent voiding the warranty.
Securing the feet in the round section for structural stability against ground movements.
Step-by-step guide for filling the pool with water, including initial steps and precautions.
Regularly inspect skimmer, water return, and liner for leaks and corrosion.
Guidance on maintaining proper water chemistry and recommended parameters.
Guidelines for regular cleaning of pool surfaces and chemical deposits.
Instructions for preparing the pool for winter to prevent damage.
Steps to winterize the filtration system components.
Recommendations for using a winter cover to protect the pool.
Steps for opening the pool after winter and restarting the filtration system.
Details on replacement part availability, warranty terms, and coverage.
How to obtain warranty service and contact technical support.
Legal disclaimers regarding product use and liability.
To Next Page
