Why is my Caryaire Fan not cooling or heating?
There could be several reasons why your Caryaire Fan isn't cooling or heating: * Check the water source to ensure proper water flow. * Purge any air trapped in the system using the purge valve attached to the coil, as an air lock may be present. * Verify that you've selected the correct operation mode.
What to do if Caryaire Fan shows H6 Feed Controller rotation back Communication loop error?
If your Caryaire Fan displays an H6 error related to the Feed Controller rotation, it indicates a communication loop issue between the Controller PCB and the Motor. First, check the connections between the Motor and the PCB. Also, investigate the reason why the motor is not working.
What to do if Caryaire Fan displays F1/E1 Room sensor failure?
If your Caryaire Fan is showing an F1/E1 error, it indicates a room sensor failure. Replace the room sensor to resolve this issue.
What to do if Caryaire Fan displays F2/E1 Coil sensor failure?
If your Caryaire Fan displays an F2/E1 error, this indicates a coil sensor failure. You should replace the coil sensor.
Lists error codes, diagnoses, and corrective actions for troubleshooting.
Details on connecting indoor and outdoor piping with specified torque and flaring practices.
Illustrates wiring diagrams for indoor units with external and internal actuator valves.
General| Model | CZHW-40 |
|---|---|
| Frequency | 50Hz |
| Speed Settings | 3 |
| Oscillation | Yes |
| Material | Plastic |
| Color | White |
| Voltage | 220V |
| Blade Size | 16 inches |
To Next Page