Why is my Caryaire Fan not cooling or heating?
There could be several reasons why your Caryaire Fan isn't cooling or heating: * Check the water source to ensure proper water flow. * Purge any air trapped in the system using the purge valve attached to the coil, as an air lock may be present. * Verify that you've selected the correct operation mode.
What to do if Caryaire Fan shows H6 Feed Controller rotation back Communication loop error?
If your Caryaire Fan displays an H6 error related to the Feed Controller rotation, it indicates a communication loop issue between the Controller PCB and the Motor. First, check the connections between the Motor and the PCB. Also, investigate the reason why the motor is not working.
What to do if Caryaire Fan displays F1/E1 Room sensor failure?
If your Caryaire Fan is showing an F1/E1 error, it indicates a room sensor failure. Replace the room sensor to resolve this issue.
What to do if Caryaire Fan displays F2/E1 Coil sensor failure?
If your Caryaire Fan displays an F2/E1 error, this indicates a coil sensor failure. You should replace the coil sensor.
Instructions for turning the unit on/off, selecting modes (FAN, Cool, Heat, DRY), and adjusting fan speed.
Crucial safety advice regarding electrical connections, grounding, and power cable handling.
Guidelines for cleaning, placement, and operating the unit safely in various environmental conditions.
Troubleshooting common problems like unit not running, cooling issues, or unusual sounds.
To Next Page
General