EasyManua.ls Logo

CAS Scales CL5200 - User Manual

Default Icon
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
CL5000 Series
(CL5000, CL5200, CL5500)
Service Manual
(English)
Rev. 2011. 04. 07

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the CAS Scales CL5200 and is the answer not in the manual?

Summary

Proper Operation Guide

CL5000;CL5500 Series Specifications

Detailed technical specifications including capacity, interval, display types, and various configuration options for the scale models.

Environmental Conditions and Safety Precautions

Guidelines for safe operation, environmental protection, and personal safety when using the scale.

Power Outlet and Electrical Requirements

Information regarding the scale's power source, consumption, and proper connection to electrical outlets.

Getting Started with the Scale

Label Roll Installation Guide

Step-by-step instructions for correctly installing the label roll into the printer.

Navigating the Program Menu

Guide on how to access and navigate the scale's program mode, including menu structure.

Calibration and Configuration Modes

Overview of Calibration

General instructions for executing weight and A/D related settings for calibration.

Span Calibration Procedure

Detailed steps for performing span calibration using certified weights.

Span and Zero Fine Adjustment

Fine-tuning the scale's zero and span values after the initial calibration.

Setting Capacity and Units

Configuration of weighing unit, maximum capacity, and interval for calibration purposes.

Gravity Constant Setting

Procedure to set the gravity constant based on location for accurate calibration.

Percent Calibration Method

Instructions for performing calibration using a lighter weight when max weight is unavailable.

Linearity Adjustment Procedure

Re-adjusting the mid-range weight level for enhanced calibration precision.

Zero and Tare Range Configuration

Setting the acceptable zero, tare, and overload ranges according to local regulations.

Servicing and Parts Replacement

Platform Safety Overload Adjustment

Procedure to adjust the platform for safe overload handling.

Main Board Replacement Guide

Detailed instructions for replacing the main control board of the scale.

Power Supply Unit Replacement

Procedure for safely removing and replacing the scale's power supply module.

Load Cell and AD Converter Replacement

Instructions for replacing the load cell and the analog-to-digital converter module.

Print Assembly Replacement

Steps for removing and replacing the printer module assembly.

Display Unit Replacement

Instructions on how to remove and replace the scale's display unit.

Keyboard Replacement Procedures

Methods for replacing the keyboard, with and without breaking the factory seal.

Installing Optional Hardware

Firmware Update Procedures

Firmware Update for CL5000

Step-by-step guide for updating the firmware on CL5000 series scales using PC software.

Firmware Update for CL5500

Procedure for updating the firmware on CL5500 series scales using PC software.

CAS Scales CL5200 Specifications

General IconGeneral
BrandCAS Scales
ModelCL5200
CategoryScales
LanguageEnglish

Related product manuals