CAS CL5500 Series - Page 28

28
CAS ELECTRICS CO.,LTD
4.1.2 Span/Zero Fine Adjust (Menu Code 8120)
(Calibration MENU -> 1. Calibration -> 2. Span/Zero Fine Adjust)
This mode is for fine tuning of scale after span Cal. Please put Max weight on the tray and adjust
A/D results at 60000, using the cursor key “ ▶ .” ▶ and Number key.
① Select menu “Span/Zero Fine Adjust”
* If ⓒ is not set to zero press “ ZERO” key. Value ⓓ will update.
② Put Max. Capacity weight on the tray
③ Use ▶ ▶ key for fine adjust.
* Insert setting value by cursor key (for the fine tune)
“ ▶ ” Increases Span value “ ⓓ ” to decrease Internal value “ ⓑ ”
“ ” ▶ Decreases Span value “ ⓓ ” to increase External value “ ⓑ ”
- Internal value 60012 needs to change 60000
Press X 12 Times to decrease internal value.
ⓐ Menu Code ⓑ Internal Value
ⓒ External Value (Weight)
ⓓ Pure setting value of Zero & Span
▶
8120 0 0
S
PAN/ZERO FINE ADJUST
(1/
1
)
ZERO:[ 10730]
SPAN:[ 88133]
8120 60012 15005
S
PAN/ZERO FINE ADJUST
(1/
1
)
ZERO:[ 10730]
SPAN:[ 88133]
8120 60000 15000
S
PAN/ZERO FINE ADJUST
(1/
1
)
ZERO:[ 10730]
SPAN:[ 88145]