CAS EB Series - Page 12

13
f. Hold function
■ Key Hold function
1)
Place an item on the platter and press the Hold key.
2) Then weight display will show “Hold”. The “Hold” blinks for two times, and then
the average weight blinks for 3 times.
3) Then automatically exit to normal weighing mode.
■ Auto Hold function
1)
After weighing item remove all of the container from the platter, press Hold key.
2) Use “TARE” key to select one of Auto Hold function.
3) Press “Hold” key to save and exit to normal mode.
4) Place an item on the platter.
5) Then weight display will show “Hold”. The “Hold” blinks for two times, and then
the average weight blinks continuously.
6) Remove the item from the platter. Then automatically exit to normal weighing mode.