CAS EB Series - Page 14

15
4) Press “ ” key.
b. Saving PLU name (option)
■ If you have “24 PLU name inputting option” you may save the name of PLU for 1~28.
■ “C” key is to input, save a character, and move to next character (or byte).
■ “TARE” key is to save and exit.
1) Input appropriate ASCII codes to save the PLU name.
※ Please refer to the ASCII table on page 48.
Ex) “APPLE” is “4, 1, C, 5, 0, C, 5, 0, C,….
C C
CC C
Press "4", "1"
Press "C"
Press "5", "0"
Press "C"
Press "5", "0"
Press "C"