4544
Measurement without storing data (Guest mode)
1. Follow the instruction in “BEFORE MEASURING
BLOOD PRESSURE” to make yourself ready.
2. Press [ ] and [ ] button simultaneously
when the device is off to start measurement.
The average blood pressures and last
data number are displayed briefly. The current
pressure is displayed, as the measurement begins.
3. The cuff starts to inflate. It is normal for the cuff
to feel very tight. A pressure bar indicator is
displayed during measurement.
See “PRESSURE BAR INDICATOR” for more details.
4. When inflation is complete, deflation starts
automatically. Once the pulse is detected,
the [ ] blinks with each pulse beat,
indicating that the measurement is in progress.
5. When the measurement is complete, the systolic
and diastolic pressure and pulse rate are displayed
and stored. At the same time, the cuff exhausts
the remaining air and deflates completely.
6. Press either [ ] or [ ] button to turn off the power.
NOTE :
• You can stop ination by pressing [ ] or [ ] button at any time.
• Measurement result will not recorded into data on average or memory.
Deflation for start measuring Record number shown
Inflation in progress
Measurement result shown
[ ] icon blinks
Deflation for start measuring
Inflation in progress
Measurement result shown
[ ] icon blinks
The indicator monitors the progress of pressure during measurement.
Each of the six segments of the bar indicator corresponds to the WHO blood pressure classication.
WHO Classification Indicator :
PRESSURE BAR INDICATOR
WHO CLASSIFICATION INDICATOR
Pressurizing Releasing Air
Inflation in progress
Inflation complete
Measurement in progress
중증 고혈압
중 고혈압
경 고혈압
고정상 혈압
정상 혈압
최적 혈압
Severe Hypertension
Moderate Hypertension
Mild Hypertension
High Normal
Normal
Optimal
To Next Page
Loading...