Need help?Do you have a question about the Casa CTL-DCM and is the answer not in the manual?
General| Type | Digital Clamp Meter |
|---|---|
| Continuity Test | Yes |
| Data Hold | Yes |
| Operating Temperature | 0°C to 40°C |
| Power Supply | 9V battery |
| Display | LCD |
| Resolution | 0.1A |
Addresses power, stand-alone, master-slave, and DMX mode operational problems, including unit behavior and reset procedures.
Covers unpacking, safety precautions like avoiding eye exposure, and maintenance including fuse replacement.
Details working modes (DMX, Sound Active, AUTO, Master-Slave), programs, effects, DMX channels, and linking capabilities.
Lists power, laser types, voltage, fuse, DMX channels, interface, size, and weight.
Explains unit installation, connection, DMX addressing via dipswitches, and console control for DMX mode.
Clarifies DMX console limitations with Master-Slave and the single master requirement.
Details using dipswitches for mode selection (DMX/slave, sound active, AUTO) and DMX addressing.
Describes linking units, setting master/slave modes, and adjusting audio sensitivity.
Details DMX channels, functions, values, and lists available static and dynamic patterns.
Notes which pattern types (static/dynamic) are adjustable by DMX value.
To Next Page