www.CasablancaFanCo.com
1.888.227.2178
6
M8509-01 • 06/24/13 • © Casablanca Fan Company
Blades
Attach each blade to the motor housing
using three blade screws and three
blade washers, found in the hardware
bag. Securely tighten after all three
screws are attached.
Note: The sticker on the blade should
be facing downward.
Your blades are shielded with Dust
Armor® which is a nanotechnology
coating that repels dust. For cleaning
the fan, use soft brushes or cloths to
prevent scratching. Cleaning agents
may damage the nishes.
To Next Page
