To Next PageTo Next Page
Need help?Do you have a question about the Casablanca aris and is the answer not in the manual?
General| Number of Blades | 5 |
|---|---|
| Motor Voltage | 120V |
| Remote Control | Yes |
| Light Kit Compatible | Yes |
| Model | Aris |
| Brand | Casablanca |
| Type | Ceiling Fan |
| Reversible | Yes |
| Light Kit Included | No |
| Blade Material | Wood |
Guidance on checking wiring, building structure, and friend assistance for fan installation.
Instructions for determining ceiling angle and downrod needs for installation.
Lists essential tools like ladder, pliers, wire strippers, and screwdrivers for installation.
Lists optional tools such as a power drill and drill bit for mounting to support structures.
Describes standard downrod mounting for flat ceilings.
Details options for angled ceilings, including longer downrods and angled mounting kits.
Provides a visual guide to determine if a ceiling angle exceeds 34 degrees.
Instructions for installing the ceiling bracket using wood or machine screws.
Specifies orientation of the bracket opening for angled ceilings.
Suggests using a helper to insert grommets into blades during preparation.
Instructions to remove shipping blocks or rings from the motor and discard screws.
Illustrates standard, shorter, and longer downrod options for different ceiling heights.
Details the process for removing the standard downrod pipe and reassembling with a new one.
Instructions on removing and tightening the downrod setscrew securely.
Guidance on cutting and stripping wires, leaving sufficient length from the downrod.
How to position the canopy and thread wires through it.
Crucial step to place the downrod ball into the ceiling bracket slot correctly.
How to connect the three grounding wires using an orange wire connector.
Connects remote receiver wires (blue, black, white) to fan wires.
Connects ceiling wires (black, white) to receiver wires (live in, neutral in).
Step-by-step guide for installing the wall control unit, including template and drywall anchors.
Instructions for grounding the wall control wires or capping the green wire.
How to position the canopy onto the hanging bracket.
Securing the canopy with two screws into the aligned holes.
Inserting grommets and securing blades to the blade ring with screws.
Aligning and installing the assembled blades to the motor housing.
Securing the blade ring to the motor with five screws.
Attaching the upper switch housing to the motor housing with screws.
Feeding the wire plug through the center hole of the upper switch housing.
Installing the third screw and tightening all three to secure the housing.
Connecting the 9-pin plug from the switch housing to the motor housing connector.
Aligning posts and notches to secure the lower switch housing.
Instructions for inserting and securing the battery in the wall control.
Steps to pair the remote control with the fan after initial installation.
Explains how to use speed buttons, lights, and reverse function on the wall control.
How the reverse button controls upward or downward airflow for different seasons.
Step-by-step guide for ejecting the battery door and replacing the battery.
Advice on using soft brushes/cloths and avoiding cleaning agents to prevent damage.
Information on the energy efficiency and cost-saving benefits of ENERGY STAR fans.
Common issues and checks when the fan fails to operate.
Solutions for fan wobbling, including tightening screws and balancing.
Tips for diagnosing and resolving noisy fan operation.
Steps to troubleshoot a non-functional remote control.
