To Next PageTo Next Page
Need help?Do you have a question about the Casablanca Trident and is the answer not in the manual?
General| Brand | Casablanca |
|---|---|
| Model | Trident |
| Category | Fan |
| Language | English |
Details structural support needs, wiring checks, and the need for qualified electricians.
Guidance on assessing ceiling angles and choosing the correct downrod length.
Presents critical safety warnings, cautions, and compliance information for installation and operation.
Lists both basic installation tools and optional power tools required for fan assembly.
Explains standard mounting for flat ceilings and angled mounting for vaulted or sloped ceilings.
Provides a method to check if the ceiling angle exceeds 34 degrees for mounting kit needs.
Covers securing the bracket to structures or boxes and orienting it for angled ceilings.
Emphasizes turning off power before installation to prevent electrical shock.
Details attaching blades with screws/washers and notes correct sticker orientation.
Information about the Dust Armor coating and recommended cleaning methods.
Presents standard and longer downrod choices and steps to remove the standard pipe.
Guides the process of reassembling the fan onto a new or replacement downrod pipe.
Instructions for preparing the downrod setscrew and tightening it securely with pliers.
Guidance on cutting fan wires, ensuring adequate length extends from the downrod top.
Covers threading wires/downrod through canopy and placing the downrod ball in the bracket.
A note indicating that the fan style may differ from the illustrations provided.
Detailed steps for connecting wires between fan, ceiling, receiver, and ground points.
Instructions for safely tucking wires into the outlet box, separating grounded and ungrounded wires.
Procedure for removing old switch wiring and connecting new wires for the wall control.
Covers inserting the wall control, securing it, and notes FCC compliance statement.
Instructions for positioning the canopy, aligning screw holes, and attaching it with screws.
Details on installing the bulb, handling the socket plug, and attaching the globe.
Crucial warning about adhering to MAX wattage limits to prevent hazards.
Instructions for installing the wall control battery and pairing the remote control with the fan.
Explains how to control fan speed, lights, and blade direction using the wall control.
Details the Safe-Exit program, providing temporary lighting after the main lights are turned off.
Step-by-step guide for installing the optional bottom cap, including power off and component removal.
Covers safety precautions for maintenance and the process of replacing light bulbs.
Recommendations for cleaning the fan using soft brushes or cloths to protect finishes.
Solutions for common fan problems like not working or remote issues, including checks and pairing.
Addresses fan wobbling, noisy operation, and dimming lights with troubleshooting steps.
