Case IH Magnum 280 - User Manual

Printedin U.S.A.
© 2018 CNH Industrial America LLC. All Rights Reserved.
Case IH is a trademark registered in the United States and many
other countries, owned or licensed to CNH Industrial N.V.,
its subsidiaries or affiliates.
Magnum
™
250
Magnum
™
280
Magnum
™
310
Magnum
™
340
Magnum
™
380
Magnum
™
310 Rowtrac
™
Magnum
™
340 Rowtrac
™
Magnum
™
380 Rowtrac
™
Continuously Variable Transmission (CVT)
Tractor
PIN ZHRF04001 and above
Part number 51431499
1
st
edition English
February 2018
SERVICE MANUAL

Summary

INTRODUCTION

General Safety Guidelines

Covers personal, general maintenance, PPE, and environmental safety rules.

General Specification - Engine

Diesel Engine Specifications

Details engine type, bore, stroke, compression, and other parameters.

Engine Systems

General Specification - Power Train

Powershift Transmission

Details specifications for the 18 and 23-speed Powershift transmissions.

Continuously Variable Transmission (CVT)

Provides specifications for the hydraulic CVT, including output shaft speeds.

Brakes

Mechanical Front Drive (MFD) Axles

Capacities

Engine Oil Capacities

Transmission and Hydraulic System Capacities

Fuel Capacity

Product Identification

Tractor Model and VIN

Explains how to identify tractor model, PIN, and serial numbers.

Engine - 10

Engine and Crankcase Overview

Details the Cursor® 9 engine and its crankcase components.

Functional Data

Provides engine overview, special tools, and dynamometer testing information.

Service Procedures

Outlines engine removal, installation, and dynamometer testing procedures.

Case IH Magnum 280 Specifications