To Next PageTo Next Page
Need help?Do you have a question about the Case IH MAXXUM 115 and is the answer not in the manual?
Important notices, guidance on using and navigating the service manual.
Explains manual organization, sections, chapters, information types, and search coding.
Covers personal safety, machine safety, and environmental protection guidelines.
Basic instructions for shimming, seals, compounds, and spare parts.
Precautions for charging/welding and benefits of using special tools.
Torque values, hardware identification, conversion factors, and consumables.
Fluid capacities for MAXXUM® tractor models (115 to 150).
Fluid capacities for MAXXUM® Multicontroller models (115 to 150).
Fluid capacities for MAXXUM® CVT models (115 to 145).
Includes prior operation steps, safety warnings, and general vehicle preparation.
Steps for draining transmission oil and disconnecting front hitch hydraulic pipes.
Procedures for disconnecting radar, removing side rails, and oil cooler pipes.
Steps for detaching fuse box and disconnecting various electrical connectors.
Procedures for disconnecting heater pipes, breather pipe, fuel lines, and air intake.
Steps for disconnecting steering pipes, brake fluid reservoir, and various sensors.
Procedures for disconnecting DEF/AdBlue, NOx modules, emission filters, coolant lines, and turbocharger parts.
Steps for removing engine frame bolts, steering motor pipes, lifting eyes, and separating engine from transmission.
Includes prior operation steps, safety warnings, and notices for engine removal.
Steps for draining transmission oil and disconnecting oil cooler supply and return pipes.
Procedures for disconnecting alternator, starter, and various electrical connectors.
Steps for disconnecting heater pipes, breather pipe, fuel lines, and air intake.
Steps for disconnecting steering pipes, brake fluid reservoir, and various sensors.
Procedures for disconnecting DEF/AdBlue, NOx modules, emission filters, coolant lines, and turbocharger parts.
Steps for removing engine frame bolts, steering motor pipes, lifting eyes, and preparing for engine separation.
Includes preparation steps, safety warnings, and notes for engine installation.
Steps for cleaning mating surfaces and aligning the engine to the transmission.
Procedures for installing and torquing engine to transmission retaining bolts.
Steps for removing splitting stand supports and lifting equipment after engine installation.
General