SECTION 1 -- GENERAL INFORMATION AND SAFETY
1--3
PRODUCT IDENTIFICATION
The tractor and major components are identified
using serial numbers and/or manufacturing codes.
Tractor identification data must be supplied to the
dealer when requesting parts or service and will also
be needed to aid in identifying the tractor if it is ever
stolen.
The following provides the locations of the
identification data.
1
1
Vehicle Identification Plate
The vehicle identification plate (1), Figure 1 is
located on the left--hand radiator support. Record the
information on the sample identification plate
provided below.
2
Tractor Identification
The serial number and model identification
information is stamped on the front support (1).
These numbers are also repeated on the vehicle
identification plate reproduced above.
3
Find manuals at https://best-manuals.com
To Next Page
Loading...
Need help?
General