To Next PageTo Next Page
Need help?Do you have a question about the Case IH PUMA CVX 200 and is the answer not in the manual?
General| Engine Power | 200 hp |
|---|---|
| Max Power | 240 hp |
| PTO Power | 180 hp |
| PTO Speed | 540/1000 rpm |
| Wheelbase | 2, 884 mm |
| Width | 2, 550 mm |
| Height | 3, 050 mm |
| Cylinders | 6 |
| Engine Type | 6-cylinder turbocharged diesel |
| Transmission | Continuously Variable Transmission (CVT) |
| Hydraulic System Flow | 150 L/min |
How to select driving direction and control ground speed using the shuttle lever and MC.
How the Multicontroller and driving pedal control ground speed, with automatic APM adjustment.
Explains how to accelerate using MC/pedal and decelerate using the foot pedal with different aggression levels.
Setting constant engine speed and using Headland Management Control (HMC) for recording.
Steps for connecting implements, adjusting height, setting position, and engaging AUTO FLOAT mode.
Available PTO speeds for different Puma CVX models and corresponding engine speeds.
How to set lifting height values for automatic PTO switching and activate AUTO PTO.
Overview of available functions on the AFS Pro 700 monitor, including setup, diagnostics, and data management.
Instructions for recording sequences of actions for headland maneuvers, based on time or distance.
Procedures for replaying recorded sequences automatically or manually.
Methods for recording sequences using HMC II, including active work and stationary input.
How to modify, delete, or add steps and change triggers in recorded HMC II sequences.
