To Next PageTo Next Page
Need help?Do you have a question about the Case IH PUMA CVX 220 and is the answer not in the manual?
General| Engine Power | 220 hp |
|---|---|
| Max Speed | 50 km/h |
| 3-Point Hitch Category | Category III |
| Transmission | CVT |
| Hydraulic System | Closed center load sensing |
| Hydraulic Pump Flow | 150 liters/min |
| Width | 2550 mm |
| Wheelbase | 2, 884 mm (113.5 in) |
How to change ground speed using the Multicontroller and foot pedal.
How the tractor increases ground speed based on control inputs.
Explains deceleration using the foot pedal and its different settings.
How to decelerate using the Multicontroller and its modes.
Maintaining stability when transporting heavy trailers.
Overview of the Headland Management Control system for automated operations.
Activation and operation of the Accu-Guide guidance system.
Connecting hydraulic hoses for single/double acting cylinders and oil motors.
Description of the Power Beyond plate for direct oil supply.
Available PTO speeds and corresponding engine RPMs for different models.
Setting lifting heights for auto PTO switching and activating the function.
Overview of functions like setup, work screens, data transfer, Accu-Guide, and HMC.
How to replay recorded sequences automatically or manually.
Different modes for recording HMC II sequences during active work or stationary input.
How to modify, add, or delete steps and change triggers in recorded sequences.
How to save recorded sequences to slots A and B for specific implements.
How to select and start replaying stored sequences.
