2
FIRST STEPS
To start using the tractor:
1. Set Shuttle Lever in Parking Position !
To start the engine set shuttle lever
in parking position (press lever down,
then forward).
2. Ensure that Multicontroller
(MC) is fully pulled back !
Only start the engine with
the MC in full backward
position.
3. Adjust the Split Hand Throttle ā
Eco-Drive
TM
!
Acceleration only possible if right
hand lever is set above the left one.
minimum
engine speed
maximum
engine speed
1
2
1
2
POWER
ECO
Constant
Engine Speed
TRANSPORT
Engine Droop
PTO