Case IH PUMA CVX 175 User Manual

PUMA CVX
QUICK INSTRUCTION
This booklet gives a brief overview of
the most important controls of the
Case IH Puma CVX
The quick instruction is not a substitute for the operator´s manual !
To operate the vehicle follow the
instructions in the operator´s manual !
Note: this quick instruction also includes optional
equipment that is not included in the basic version.
150, 165, 175
185, 200, 220, 240

Case IH PUMA CVX 175 Specifications

General

Engine Power	175 hp
Cylinders	6
Max Speed	50 km/h
Rated Power	175 hp
PTO Speed	540/1000 RPM
Transmission	CVT
Engine	6.7L FPT
Hydraulic Remotes	Up to 4
Height	3, 050 mm

Summary

Tractor Driving Operations

Selecting Driving Speed with Controls

Using the Multicontroller and foot pedal to control ground speed.

Acceleration Control Mechanisms

Deceleration Using the Foot Pedal

Tractor Driving Operations - Advanced

Deceleration with Multicontroller

Managing deceleration and active hold using the Multicontroller.

Detailed Control Element Descriptions

Shuttle Lever Functions Explained

Detailed explanation of shuttle lever positions and parking brake.

Multicontroller Functions Explained

In-depth look at Multicontroller features like speed range and remote valves.

Control Elements by Location

Controls Under Armrest Lid Detailed

Detailed list and function of controls under the armrest lid.

Control Elements on C-Pillar Detailed

Identification and function of control elements on the C-pillar.

A-Pillar Display Information

Multi-Function Display Content Overview

Summary of information displayed on the multi-function display.

Intuitive Control Panel Functions

Constant Engine Speed and Eco Fan

Setting constant engine speed and operating the Eco Fan.

HMC, Suspension, and Traction Systems

Overview of HMC, front axle suspension, and traction management.

Intuitive Control Panel Functions - Advanced

Hydraulic Status and Auto PTO

Rear Hitch and Front Hitch Operations

Detailed operations for rear and front hitches.

Joystick, CVT, Slip Control, and Transmission Modes

Front Hitch Management (FHM)

Working with the Front Hitch System

Step-by-step guide for operating the FHM.

Engaging and Disengaging AUTO FLOAT Mode

Power Take Off (PTO) Systems

PTO Speed Selection and Engine RPM Matching

Selecting PTO speeds and matching them with engine RPM.

Auto PTO Functionality and Activation

Setting lift heights and activating the auto PTO switch.

AFS Pro 700 Monitor Functions

Monitor Setup, Customization, and Status

Implement Control, Guidance, and Diagnostics

Headland Management Control (HMC)

Recording Headland Maneuvers Sequence

Steps for recording sequences of headland actions.

Headland Management Control (HMC) - Replay

Replaying Recorded HMC Sequences

Procedures for automatic and manual replay of sequences.

HMC II System: Sequence Recording

HMC II Recording Modes Explained

HMC II System: Editing Recorded Functions

Editing HMC II Sequence Steps and Triggers

HMC II System: Sequence Storage and Playback

Storing HMC II Sequences

Playing Back HMC II Sequences