Case IH TIGER-MATE 255 - Page 13

4-PRE-ASSEMBLY
1.Removetheslottedspringpin(B)andthewasher(C)
fromthepin(D)intherockerpivot(A).
2.Discardtheslottedspringpin(B).
NOTE:Anewslottedspringpinisprovidedinthekit.
3.Removethepin(D)fromthemainframegaugewheel
turnbuckleassembly(E).
NOTE:Keepthispinforre-assembly.
4.Removetheslottedspringpin(B)andthewasher(C)
fromthepin(F).Discardtheslottedspringpin(B).
NOTE:Anewslottedspringpinisprovidedinthekit.
5.Removethepin(F)fromthemainframegaugewheel
turnbuckleassembly(E)andthelowergaugewheel
linkassembly(G).Discardthepin(D).
NOTE:Anewpinisprovidedinthekit.
6.Discardthemainframegaugewheelturnbuckleas-
sembly(E).
4-3
EN