To Next PageTo Next Page
Need help?Do you have a question about the Case IH AXIAL-FLOW 7120 and is the answer not in the manual?
General| Separator Type | Axial-Flow |
|---|---|
| Threshing System | Single Rotor |
| Chaff Spreader | Standard |
| Straw Chopper | Optional |
| Transmission Type | Hydrostatic |
| Engine Power | 350 hp |
| Engine | FPT 6.7L |
| Rotor Diameter | 30 in |
| Shoe Area | 5.5 sq ft |
| Grain Tank Capacity | 300 bu (10, 600 L) |
Defines signal words like Danger, Warning, Caution, and Notice for hazard communication.
Lists essential precautions for operator safety, including machine operation and adjustments.
Provides guidance on shimming, installing shaft seals, O-rings, sealing compounds, and ordering spare parts.
Outlines daily, and periodic maintenance procedures based on operating hours.
Provides torque specifications for metric non-flanged hardware for safe and correct assembly.
Provides standard torque data for hydraulic tubes, fittings, and O-ring boss plugs.
Details engine power, governor, speed, displacement, battery, and alternator specifications.
Lists fluid capacities for engine, hydraulic systems, gearboxes, and PTO for various machine models.
Locates the Product Identification Number (PIN) plate for the combine and engine on the machine.
