Case 1021G - Page 56

Engine-Engineandcrankcase
13.Installthenegativecable(startertoground)(1),the
negativecable(batterytostarter)(2)ontheengine
starter.Tightentherelatednut.
Useexistinghardwaretomountthepositivecable
(batteryisolatortostarter)(3)andCPWR,XM1Ccon-
nectors(4),(5)totheenginestarter.Torqueto22.5–
29.4N·m(16.6–21.7lbft).
LEIL16WHL1527AB11
14.InstallandtightentheSTwire(1)totheenginestarter.
LEIL15WHL1299AB12
15.Connecttheelectricalconnectortotheenginecontrol
unit.
LEIL15WHL1085AA13
16.Securethewirestotheengineblockwithclamps.
ConnecttheGND_ENG1,GND_ENG3,GND_ENG4
terminalsandGND_CENG1,GND_CENG2termi-
nals.
LEIL17WHL0306AB14
48083742_EN31/07/2018
10.1[10.001]/23