EasyManua.ls Logo

Case 1850K - 1850 K-TABLE OF FLUIDS USED

Case 1850K
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual
GENERALITIES1850K 0 - 5
1850 K -Table of fluids used
Note: Oil quantities indicated are those required for periodical changes.
* In case of use of engine oil classified "CH4" the change interval can be
extended to 500 hours providing that the ambient temperature does not
exceed 38 °C (100 °F) and the fuel sulphur content does not exceed 0.5%.
ITEM
QUANTITY
Fluids and lubricants VISCOSITY Outdoor temperatures International
(liters)
AKCELA GRADE of reference Classification
USG
Agriflú
Premium mixed with 50%
Down to - 35 °C
Cooling system 25 (6.6) Anti-Freeze water protect
(-31 °F)
MS 1710 down to
- 35 °C (- 31°F)
DIESEL FUEL ASTM No. 2D
Fuel reservoir 400 (105.7) Grade TT of reputable
quality and make
Engine 19 (5) AKCELA NO. 1 Engine Oil* API CH4 and ACEA E5
Torque converter/Transmission
AKCELA
(Front Transmission Housing)
48 (12.6)
Hy-Tran® Ultra
SAE 10W All season
CNH MAT 3505
Rear Transmission housing
63 (16.6) AKCELA NO. 1 Engine Oil SAE 10W - 30 All season API CF-4
Planetary steering / brakes
Equipment Hydraulic Reservoir 90 (23.8)
AKCELAHydraulic
Grade NT - 20 / 50 °C ( - 4 - 122 °F)
DIN 51524 PART-2 HVI
Excavator Fluid - MS 1230 ISO VG-46
Final drives (each) 33 (8.7) AKCELA GEAR 135 HEP SAE 80W - 90 All season API GL5 or MIL-L-2105 D
Idlers Rollers
7 (1.8) CASE NO. 1 Engine Oil SAE 10W - 30 All season API CF-4
and track chains
Grease fittings
CASE Molydisulfide Grade 251 H - EP,
All season
Grease Spec B-27
Cab tilting pump 0.5 (0.13)
CNH MS 1209,
SAE 10W All season ATF Type A Suffix A
Hy-Tran® Ultra
SAE 15W - 40 - 15 / 40 °C ( -5 / 104 °F)
SAE 10W - 30 - 25 /25 °C (- 13 / 77 °F)
as 0.5% sulphur Normal Service interval
0.5 to 1% Half normal interval
up to 1% One quarter normal interval
If the content of sulphur of the fuel exceeds 0.5%, change the engine oil as follows:
Mixture of water and antifreeze at
50%. The mixture provides
oxidation, foaming, corrosion,
scaling and freezing protection
properties down to - 35 °C (- 31 °F).
MS 1209

Related product manuals