Case 2010 - Page 20

SECTION 00 - GENERAL INFORMATION - CHAPTER 2
00-2
SPECIFICATIONS
2010
Head Size
6.0 m 7.6 m 9.2 m
(20′)(25′)(30′)
Dimensions
Width-overall 6.59 m NA NA................................
(single knife drive) (21′6″)
Width-overall NA 8.07 m 9.59 m................................
(double knife drive) (26′6″)(31′6″)
Width-crop gathering 6.0 m 7.6 m 9.2 m.........................
(20′)(25′)(30′)
Width-crop cutting 5.95 m 7.47 m 8.99 m...........................
(19′6″)(24′6″)(29′6″)
Length-without dividers 1.39 m 1.39 m 1.39 m.......................
(4′6-5/8″)(4′6-5/8″)(4′6-5/8″)
Length-with dividers 2.64 m 2.64 m 2.64 m.........................
(8′8″)(8′8″)(8′8″)
Height 1.2 m 1.2 m 1.2 m.....................................
(Less reel) (4′)(4′)(4′)
Cutting height with head on ground 25 mm 25 mm 25 mm............
(1″)(1″)(1″)
Minimum (below ground) 406 mm 406 mm 406 mm.....................
(16″)(16″)(16″)
Maximum 1270 mm 1270 mm 1270 mm..................................
(50″)(50″)(50″)
Weight without reel
Approximate 1478 kg 1788 kg 2145 kg................................
(3229 lbs.) (3933 lbs.) (4719 lbs.)
Knife drive
Number of drives Single Double Double............................
Belt type V-belt V-belt V-belt...................................
Drive mechanism wobble box-sealed in oil bath............................