SECTION 00 - GENERAL INFORMATION - CHAPTER 2
00-4
Head Size
6.0 m 7.6 m 9.2 m
(20′)(25′)(30′)
Reel
Bat reel
Number of bats 5 steel 5 steel 5 steel...........................
bats bats bats
Bat width 178 mm 178 mm 178 mm................................
(7″)(7″)(7″)
Diameter 1016 mm 1016 mm 1016 mm................................
(40″)(40″)(40″)
Pickup reel
Number of bats 6 plastic 6 plastic 6 plastic...........................
bats bats bats
Fingers (cammed) plastic (std.) plastic (std.) plastic (std.)........................
steel (opt.) steel (opt.) steel (opt.)
Diameter 1067 mm 1067 mm 1067 mm................................
(42″)(42″)(42″)
Standard speed range 5 RPM to 5 RPM to 5 RPM to.......................
61 RPM 61 RPM 61 RPM
Height adjustment mech. - mech. - mech. -...........................
drawbolts drawbolts drawbolts
Lifting means hydraulic hydraulic hydraulic...............................
cylinders cylinders cylinders
Fore and aft adjustment hyd. hyd. hyd.......................
Hydraulic Std. retention retention retention
Weight-bat reel approximate 193 kg 241 kg 289 kg..................
(with attaching pkg) (424 lbs.) (530 lbs.) (636 lbs.)
Weight-pick-up reel-plastic tine 206 kg 257 kg 309 kg................
approximate (with attaching pkg) (453 lbs.) (566 lbs.) (679 lbs.)
Weight-pick-up reel-steel tine 273 kg 338 kg 384 kg.................
approximate (with attaching pkg) (600 lbs.) (744 lbs.) (844 lbs.)
Reel Speed Drive Hydraulic Hydraulic Hydraulic...........................
motor motor motor
To Next Page
Loading...
