SECTION 00 - GENERAL INFORMATION - CHAPTER 2
00-7
Head Size
6.1 m 7.6 m 9.2 m
(20′)(25′)(30′)
Reel
Pickup reel
Number of bats 6 bats 6 bats 6 bats...........................
Fingers (cammed) plastic (std.) plastic (std.) plastic (std.)........................
steel (opt.) steel (opt.) steel (opt.)
Diameter 1067 mm 1067 mm 1067 mm................................
(42″)(42″)(42″)
Standard speed range 5 RPM to 5 RPM to 5 RPM to.......................
61 RPM 61 RPM 61 RPM
Cutter bar to reel mech. - mech. - mech. -............................
clearance adjustment drawbolts drawbolts drawbolts
Reel height adjustment hydraulic hydraulic hydraulic.......................
cylinders cylinders cylinders
Fore and aft adjustment hydraulic hydraulic hydraulic......................
(Hyd Standard) cylinders cylinders cylinders
Weight-pick-up reel-plastic tine 206 kg 257 kg 309 kg................
approximate (with attaching pkg) (453 lbs.) (566 lbs.) (679 lbs.)
Weight-pick-up reel-steel tine 273 kg 338 kg 384 kg.................
approximate (with attaching pkg) (600 lbs.) (744 lbs.) (844 lbs.)
Reel Speed Drive Hydraulic Hydraulic Hydraulic...........................
motor motor motor
Automatic Height Control Standard Standard Standard...................
Lateral Float Automatic Automatic Automatic...............................
standard standard standard
To Next Page
Loading...
