2000-9
Bur 5-10860 Issued 2-08 Printed in U.S.A.
STEP 32
BD07N596-01
BD07N583-01
BD07N584-01
Remove the radiator hose (1) from the rear of the
engine, remove the heater hose from the rear of the
engine (2), remove the clamp bolts and clamps (3)
from the bell housing.
STEP 33
BD07N585-01
Tag and remove the grid heater cable.
STEP 34
BD07N586-01
Disconnect the wiring harness from the EDC 7
controller.
NOTE: Lifting up on the lever will release the
connector from the controller.
STEP 35
BD07N591-01
Remove the fuel line from the top of the EDC 7
controller, plug the line and cap the fitting.
1
2
3
To Next Page
Loading...
