Case 580SN - User Manual

Printedin U.S.A.
© 2017 CNH Industrial America LLC. All Rights Reserved.
Case is a trademark registered in the United States and many
other countries, owned by or licensed to CNH Industrial N.V.,
its subsidiaries or affiliates.
Part number 48194558
1
st
edition English
October 2017
SERVICE MANUAL
580N
580SN WT
580SN
590SN
Tier 4B (final)
Tractor Loader Backhoe
580N PIN NHC740665 and above; 580SN WT PIN NHC745126 and above;
580SN PIN NHC743044 and above; 590SN PIN NHC746245 and above

Summary

Introduction

Safety rules

General safety guidelines and precautions.

Safety rules - Personal safety

Guidelines for personal safety during operation and maintenance.

Basic instructions - Shop and assembly

Basic instructions - Protecting the electronic and;or electrical systems during charging and welding

Protecting electronic systems during charging and welding operations.

Basic instructions - Releasing hydraulic pressure on machines with pilot backhoe controls

Procedure for safely releasing hydraulic pressure with pilot controls.

Basic instructions - Releasing hydraulic pressure on machines with mechanical backhoe controls

Procedure for safely releasing hydraulic pressure with mechanical controls.

Basic instructions - Welding on the machine

Safety precautions and procedures for welding on the machine.

Basic instructions - Support strut for loader lift arm

Instructions for using the support strut for loader lift arms.

Capacities and fluids - 580 N (factory fill)

Capacities and fluids - 580 SN (factory fill)

Transmission

Case 580SN Specifications

General

Brand	Case
Model	580SN
Category	Compact Loader
Language	English