Case 580SN - Basic instructions - Releasing hydraulic pressure on machines with mechanical backhoe controls

INTRODUCTION
Basicinstructions-Releasinghydraulicpressureonmachineswith
mechanicalbackhoecontrols
1.Parkthemachineonrmlevelground.
2.PutalltransmissioncontrolsintheNeutralposition.
3.Engagetheparkingbrake.
4.Lowerthebuckettothegroundbutdonotapplydown
pressure;orraisetheloaderarmandengagethe
loaderarmsafetysupport.
5.Rotatetheoperatorseatintothebackhoeoperation
position.
6.Placethebackhoeinthestowedpositionwithswing
lockpininthelockposition.Ifapplicable,inserttheEx-
tendahoelockpin.Youmaychoosetoresttheback-
hoeattachmentontheground.
7.Shutofftheengine.
8.TurnthekeyswitchtotheONpositionbutDONOT
starttheengine.
9.Ifequippedwithcomboauxiliaries,enablethebidirec-
tionalswitchontheright-handsidepanel.
10.Cyclethebi-directionalcontrolleverorpedal.
11.Cycleeachbackhoecontrolleverineachdirection
andthenreleaseintheneutralposition.
12.Rotatetheoperatorseatintothedrivingposition.
RAIL14TLB0702AA1
13.Rotatetheloadercontroljoystickinonecompletecir-
cle,stoppingintheneutral(center)position.
14.Ifapplicable,operatethebucketcontrolswitch.
15.TurnthekeyswitchtotheOffposition.
LEEN12T0485AA2
4819455820/10/2017
27