Case 580SN - Basic instructions - Welding on the machine

INTRODUCTION
Basicinstructions-Weldingonthemachine
WARNING
Explosivegas!
Batteriesemitexplosivehydrogengasandotherfumeswhilecharging.Ventilatethechargingarea.
Keepthebatteryawayfromsparks,openames,andotherignitionsources.Neverchargeafrozen
battery.
Failuretocomplycouldresultindeathorseriousinjury.
W0005A
WARNING
Hazardouschemicals!
Batteryelectrolytecontainssulfuricacid.Contactwithskinandeyescouldresultinsevereirritation
andburns.Alwayswearsplash-proofgogglesandprotectiveclothing(glovesandaprons).Wash
handsafterhandling.
Failuretocomplycouldresultindeathorseriousinjury.
W0006A
Thefollowingproceduresmustbecompletedbeforewelding.
1.Ifapplicableremovethetoolbox.
A.Openthetoolboxlid.
B.Removethenut(1)fromtheinsideofthetoolbox.
C.Removebolts(2)fromunderneathstep.
D.Removethetoolboxfromthemachine.
RAIL14TLB1059BA1
RAIL14TLB1055BA2
4819455820/10/2017
31