2000-13
Bur 5-10860 Issued 2-08 Printed in U.S.A.
STEP 52
BD07N586-01
Connect wiring harness to EDC 7 controller.
NOTE: Start the connector on the EDC 7 with lever
straight out from EDC 7. Use lever to pull connector
into position.
STEP 53
BD07N585-01
Connect grid heater cable to grid heater. Remove
and discard tag.
STEP 54
BD07N596-01
BD07N583-01
BD07N584-01
Install the heater hose (2) to the rear of the engine,
mount the clamps (3), install the radiator hose (1).
STEP 55
BD07N599-01
Connect the engine coolant vent hose.
1
2
3
To Next Page
Loading...
