2000-4
84581916A Issued 3-12 Printed in E.C.
STEP 7
BD02N160
Put a container capable of holding at least 22.7 liter (6.0
gallon) below radiator drain. Remove radiator cap (4).
Remove cap and drain coolant into container. Install cap
after coolant has drained. Install radiator cap.
Put a container capable of holding at least 12.3 liter (13
U.S. quarts) below engine oil drain. Remove cap (3) and
drain oil into container. Install cap after oil has drained.
NOTE: After draining oil disconnect drain hose from
frame for removal with engine.
STEP 8
BD03A231
Double up a nylon lifting strap (1) and slide through
the exhaust stack (2) on the hood.
STEP 9
BD07N564-01
Place a solid steel bar through the strap, raise the
hood and release tension on the lifting motor.
STEP 10
BD07N597-01
Remove the right front lift cylinder from the hood.
Repeat the procedure for the left hand side.
STEP 11
W110R384
Remove the rear lift cylinder from the machine.
3
4
1
2
To Next Page
Loading...
