2001-4
STEP6
Remove the precleaner.
If
the air cleaner
is
equipped
with a cap, loosen the clamp and remove the cap.
STEP 7
Disconnect the hoses from the tubes for the oil cooler.
Install a cap on each hose and plug
in
each tube fitting.
STEP 8
Remove the plugs and loosen and remove the cap
screws, lock washers, and flat washers that fasten the
hood.
Rae
7-60130
STEP 9
Connect suitable lifting equipment to the hood and
remove the hood.
STEP 10
Disconnect the hose from the filler neck of the radiator
and install a plug
in
the hose.
STEP
11
Disconnect the top radiator hose.
Issued
7-93
Printed
in
US
A
To Next Page
Loading...
