Case CX290B - Page 3

Lep SMCX290BTOC-1NA Issued 01-2010
DIVISION/SECTION SECTION N° REFERENCE N°
8 UPPERSTRUCTURE HYDRAULICS
Specifications, troubleshooting, checks and
hydraulic pressure settings..........................................................................8001 SC290B8001-0NA
Removal and installation of the hydraulic reservoir .........................................8002 SM290B8002-0EN
Removal and installation of the main hydraulic pump......................................8003 SM350B8003-0EN
Removal and installation of the main hydraulic control valve...........................8004 SM290B8004-0EN
Removal and installation of the attachment cylinders......................................8005 SM350B8005-0EN
Removal and installation of the hydraulic swivel..............................................8006 SM290B8006-0EN
Removal and installation of the pilot blocs.......................................................8007 SM290B8007-0EN
Disassembly and assembly of the main hydraulic pump .................................8010 SM290B8010-0EN
Disassembly and assembly of the main hydraulic control valve ......................8011 SM350B8011-0EN
Disassembly and assembly of the attachment cylinders .................................8012 SM130B8012-0EN
Disassembly and assembly of the hand control levers ....................................8013 SM130B8013-0EN
Disassembly and assembly of the foot control levers ......................................8014 SM160B8014-1EN
Disassembly and assembly of the cushion valve.............................................8016 SM290B8016-0EN
Removal and installation of the safety valve....................................................8017 SM350B8017-0EN
Disassembly and assembly of the hydraulic swivel .........................................8018 SM290B8018-0EN
Disassembly and assembly of the swing motor ...............................................8019 SM290B8019-0EN
Hydraulic functions ..........................................................................................8020 SC290B8020-0NA
Hydraulic component functions........................................................................8030 SC290B8030-0NA
9 UPPERSTRUCTURE
Removal and installation of the counterweight ................................................9002 SM290B9002-0EN
Removal and installation of the boom, dipper and bucket ...............................9003 SM350B9003-0EN
Removal and installation of the seat................................................................9004 SM130B9004-0EN
Removal and installation of the cab and cab equipment .................................9005 SM130B9005-0EN
Air conditioner functions and troubleshooting..................................................9006 SC210B9006-3EN
Air conditioning unit .........................................................................................9007 SM130B9007-0EN
Air conditioning components............................................................................9009 SM290B9009-0EN
Large size hydraulic schematics ................................................................... Pocket 87601004A
Large size electrical schematics ................................................................... Pocket 87601010A
NOTE:
CNH France S.A. Company reserves the right to make changes in the specification and design of
the machine without prior notice and without incurring any obligation to modify units previously sold.
The description of the models shown in this manual has been made in accordance with the technical speci-
fications known as of the date of design of this document.
All data given in this manual is subject to production variations. Dimensions and weights are provided with
approximate values and the machine fitting shown in the illustrations may not correspond with standard
models. For precise information on specific machine models and versions, please contact your CASE
dealer.
Reproduction or tranlation, even partial, is prohibited without written authorization from CNH France SA
Company.