EasyManua.ls Logo

Case JX95 HC - Safety Warnings and Operator Information; Cautionary Statements and Important Warnings

Case JX95 HC
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAUTION
THIS WARNING SYMBOL POINTS OUT IMPORTANT MESSAGES CONCERNING YOUR
SAFETY. READ THE FOLLOWING SAFETY REGULATIONS CAREFULLY AND FOLLOW
THE RECOMMENDATIONS IN ORDER TO AVOID POTENTIAL HAZARDS AND SERIOUS
OR FATAL ACCIDENTS. SAFEGUARD YOUR HEALTH AND SAFETY AND THAT OF
OTHERS BY ALWAYS TAKING THE UTMOST CARE.
In this Manual and on the decals attached to the
tractor, the symbol is accompanied by the following
keywords:
J CAUTION – When the warning is to prevent
potential damage to the machine, which could also
put the operator’s safety at risk.
J DANGER – This warning specifically indicates a
potential danger to the user or to any other person
directly involved.
Failure to observe the instructions preceded by the
aforementioned key words (CAUTION and
DANGER) may result in severe or fatal injury to the
persons involved.
Furthermore, this Manual also contains instructions
in italics preceded by the terms NOTE and
WARNING, with the following relevance in relation to
machine protection:
J NOTEUnderlines the correct procedure or tech-
nique to be followed by the operator.
J WARNINGInforms the operator of the danger
of damaging the machine if the specified procedure
is not followed.
IMPORTANT WARNINGS
The machine is designed and produced exclusively
for agricultural and forestry use. Any other use may
lead to serious accidents.
All other use will be considered to be contrary to the
use specified by CASE IH, who cannot be held liable
for damage to property or the machine, or for
personal injuries which may result.
Persons who risk improper use will therefore assume
the responsibility for any consequences arising from
such use.
Compliance with the instructions for use, mainten-
ance and repairs described in this Manual, are the
essential preconditions for the use specified by
CASE IH.
The machine must only be used, serviced or repaired
by personnel trained in the relevant working methods
and safety regulations and who have been
authorised to work on the machine.
The driver must also observe the rules concerning
general safety and accident prevention, including the
Highway Code when driving on public highways.
Any arbitrary modifications made to this machine will
release CASE IH from any liability resulting from
damage or injury.
CASE IH and all distribution organisations, inclusive
of, but not restricted to, national, regional or local dis-
tributors, cannot be held liable for damage resulting
from the malfunction of parts and/or components not
approved by CASE IH.
Under no circumstances will a guarantee be issued
for products made or sold by CASE IH that are
damaged as a result of the malfunction of parts
and/or components not approved by CASE IH.

Related product manuals