Case 130 User Manual

9-76391
CASE
130 and 180
Compact Tractors
Service Manual
I Reprinted I

Case 130 Specifications

General

Brand	Case
Model	130
Category	Tractor
Language	English

Summary

Safety Information and Warnings

Safety Alert Symbol and Signal Words

Explains safety alert symbol, DANGER, WARNING, CAUTION definitions.

Operator Responsibilities and Warnings

Improper operation can cause injury or death; operator responsibilities.

K241S Engine Specifications

K301S Engine Specifications

Torque Specifications

General Torque Specification Tables

Torque values for general and engine fasteners based on grade/size.

Special Engine Torque Specifications

Specific torque values for cylinder head bolts, connecting rod bolts, etc.

Engine Servicing Introduction

Checking Compression Pressure

Procedure to check engine compression using a gauge.

Checking Crankcase Vacuum

Procedure to check crankcase vacuum using a gauge.

Cylinder Head Components and Tappets

Removal and Installation of Cylinder Head Components

Steps for removing and installing cylinder head components.

Tappet Adjustments

Procedure for adjusting engine tappets.

Valve and Guide Inspection Procedures

Valve Spring and Guide Inspection

Checking valve springs for condition and guides for wear.

Valve Wear and Pitting Inspection

Inspecting valves for wear, necked stems, grooves, rust, or pitting.

Valve Inspection and Runout Checks

Valve Head and Stem Wear Check

Checking for dished heads, worn grooves, stem wear, and stem diameter.

Valve Face Runout Check

Checking valve face runout after grinding using a dial indicator.

Refacing Intake and Exhaust Valves