Need help?Do you have a question about the Case FARMALL 110A and is the answer not in the manual?
General| Engine Power | 110 hp |
|---|---|
| Cylinders | 4 |
| Weight | 8, 818 lbs (4000 kg) |
| Fuel Tank Capacity | 28.5 gal (108 l) |
| Wheelbase | 94.5 in (240 cm) |
| Hydraulic System | Open center |
| Engine | 4-cylinder diesel |
| Engine Type | Diesel |
| Transmission | 12x12 |
| Hydraulic Pump Flow | 63 L/min |
| PTO Power | 95 hp |
| PTO Speed | 540/1000 rpm |
| Width | 2, 000 mm |
| Height | 105.1 in (267 cm) |
Understanding DANGER, WARNING, CAUTION, and NOTICE signals for safe operation.
Information on the ROPS for operator safety and its maintenance.
Precautions when handling hot liquids and system pressure near the radiator.
Safety advice regarding the air-conditioning system and refrigerant risks.
Importance of the PTO guard for preventing entanglement injuries.
Safety precautions for jump-starting batteries to prevent explosions.
Safety guidance for towing vehicles to prevent loss of control.
Importance of properly using the seat belt with ROPS for protection.
Steps to take before lubricating, performing maintenance, or servicing.
Safety advice on maintaining three-point contact when entering or exiting the cab.
Precautions for safely starting the engine using a booster battery.
Precautions for hot liquids and system pressure near radiator (No Cab).
Safety for AC refrigerant risks (No Cab).
Safety guidance for towing vehicles (No Cab).
Importance of seat belts with ROPS (No Cab).
Steps before maintenance (No Cab).
Precautions for starting engine with booster battery (No Cab).
Procedure for starting the engine and booster battery connection.
Troubleshooting steps for engine symptoms.
Troubleshooting steps for hydraulic system symptoms.
Troubleshooting steps for three-point hitch symptoms.
Troubleshooting steps for cab-related issues.
Troubleshooting steps for electrical system issues.
To Next Page
