Case MX Series - Owner Information and Operating Guidelines

1 - TO THE OWNER
2
TRIM THIS EDGE
TRIM THIS EDGE
LEFT PAGE
Template Name: OM_1_col Template Date: 1997_02_06
Alt= to hide template information Alt+ to display template information
Rac 6-6424
TO THE OWNER
This manual covers the MX180, MX200, MX220, MX240 and MX270 models. This
manual contains important information about the safe operation, adjustment and
maintenance of your MX Series Magnum tractors. Refer to the Detail Index at the
end of this manual for locating specific items about your machine.
DO NOT operate or permit anyone to operate or service this machine until you or
the other persons have read this manual. Use only trained operators who have
demonstrated the ability to operate and service this machine correctly and safely.
This tractor, with standard equipment and authorized attachments, is intended to
be used for farming, ranching, etc.
DO NOT use this machine for any application or purpose other than those
described in this manual. Consult an authorized dealer or the Case Corporation
on changes, additions or modifications that can be required for this machine to
comply with various country regulations and safety requirements. Unauthorized
modifications will cause serious injury or death. Anyone making such
unauthorized modifications is responsible for the consequences.
This Operators Manual is to be stored in the manual compartment equipped on
this machine. Make sure this manual is complete and in good condition. Contact
your dealer to obtain additional manuals. Contact your dealer for any further
information or assistance about your machine. Your dealer has Case Corporation
approved service parts. Your dealer has technicians with special training that
know the best methods of repair and maintenance for your tractor.
Manual Storage Compartment
RD98F146
Keep the Operators Manual in the
storage compartment provided on your
tractor. The Operators Manual must be
available for use by all operators.