1 - TO THE OWNER
3
TRIM THIS EDGE
TRIM THIS EDGE
RIGHT PAGE
Template Name: OM_1_col
Template Date: 1997_02_06
Alt= to hide template information
Alt+ to display template information
Rac 6-6424
EUROPEAN DECLARATION OF CONFORMITY
This tractor complies with the provisions of directive 89/336/EEC Electromagnetic
Compatibility.
EMC - Supplementary Information
Safety information for the supplementary installation of electrical and
electronic appliances and/or components.
This tractor is equipped with electronic constituents and component parts whose
function can be influenced by electromagnetic radiations of other appliances.
Such influences can cause hazards for persons if the following safety information
is not taken into account:
1. For supplementary installation of electrical and electronic appliances and/or
constituents on the tractor with a connection to the onboard system, the user
HAS to verify whether the installation causes disturbances to the electronics
on the tractor or other constituents. This particularly applies to:
Also it has to be taken into account that the supplementary installed electrical and
electronic components comply with the EMC Directive 89/336/EEC in the
respective current version and that they are CE marked.
2. For the supplementary installation of mobile communication systems (i.e.
radio communication, mobile telephone) the following additional requirements
have to be fulfilled:
A. Only devices with an approval complying with the valid national
regulations must be installed.
B. The devices must be firmly installed.
C. The operation of portable or mobile devices within the cab of the tractor
is ONLY permitted if the device has a fixed outside antenna.
D. The transmitting part shall be installed separately to the tractor
electronics.
E. Installation of the antenna must be carried out by a professional and the
antenna must have a good ground connection between the antenna and
the tractor ground.
For the correct size cabling, installation and the maximum permissible current
supply, the installation instructions of the tractor manufacturer have to be
considered additionally.
A. Powershift Control Button B. Instrument Cluster
To Next Page
Loading...
