Need help?Do you have a question about the Casella dBadge2 HB4056-07 and is the answer not in the manual?
General| Type | Personal Noise Dosimeter |
|---|---|
| Frequency Range | 20 Hz to 8 kHz |
| Frequency Weighting | A, C, Z |
| Data Logging | Yes |
| Operating Temperature | -10°C to +50°C |
| IP Rating | IP65 |
| Standards | ANSI S1.25 |
| Time Weighting | Fast, Slow, Impulse |
| Display | OLED |
| Battery Life | 35 hours |
| Power Supply | Rechargeable Li-ion battery |
| Microphone Type | Pre-polarized free-field 1/2" microphone |
Details the new functionalities and improvements of the dBadge2 model.
Provides critical instructions and precautions for using the dBadge2 in hazardous areas.
Covers the process of charging the dBadge2 using the docking station and power supply.
Explains the mandatory field calibration procedure for accurate measurements.
Provides instructions on initiating a noise measurement session with the dBadge2.
Covers connecting the dBadge2 to a mobile device via Bluetooth and security aspects.
Details the intrinsic safety markings and certifications for ATEX, IECEx, and North America.
To Next Page
